Description
BUFFALO BORE38 TAC-XP
IMPORTANT INFORMATION ABOUT THE HEADSTAMP ON THIS BRASS: Due to limited supplies of brass, Buffalo Bore has begun loading +P and +P+ ammunition in brass that may not be indicated as such on the headstamp. barnes tac-xp 38 special Example: 9mm Luger +P+ ammunition may be designated as 9mm Luger +P or simply 9mm Luger on the headstamp. buffalo bore 38 tac-xp
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on Buffalo Bore Heavy 38 Special +P Ammunition:
For those wanting a deep penetrating all copper expanding 38SPL+P load, this is it. Depending on individual impact velocity, (barrel lengths and distance to target vary) you can expect between 12 to 14 inches of penetration.
Buffalo Bore was able to engineer a flash suppressed powder for this load and therefore the shooter will not be blinded by his own gun fire in low light. This creates a huge tactical advantage as most civilian shootings in the US occur in low light when the criminal element is out and about.
See the below real world velocities fired from real world revolvers, not extra long laboratory test barrels that give false extra high velocities, that cannot be duplicated in real life. With Buffalo Bore Ammunition, you’ll always get real world, useable velocities.
- 1438 fps — Ruger GP 100, 6 inch barrel
- 1287 fps — S&W Model 15, 4 inch barrel
- 1210 fps — S&W Model 66, 3 inch barrel
- 1202 fps — Ruger SP101, 3 inch barrel
- 1149 fps — S&W Model 66, 2.5 inch barrel
- 1119 fps — S&W Model 60, 2 inch barrel
- 1104 fps — S&W Model 340, 2 inch barrel
This load is safe to fire from all 38SPL +P rated and all/any 357 firearms that are in normal operating condition. However, when fired from super light weight alloy J frame revolvers, recoil is stiff. This cartridge is designed so the bullet will not jump crimp when subjected to recoil from firing in super light 12 OZ revolvers, provided you do not subject any cartridge to the recoil of more than six or seven firings. barnes tac-xp 38 special
With great pleasure, we noted that every test gun delivered tiny little groups at 25 yards. It is normal when we observe good accuracy from most test guns and exceptional accuracy from some test guns with any load we are developing, but this load gave exceptional accuracy from every test gun. Most of our adjustable sighted test guns, needed the rear sight raised as this high speed, light weight bullet shot to a lower point of impact than normal loads our guns were already sighted in for, but the groups (accuracy potential) were very small, none-the-less.
PRODUCT INFORMATION
Cartridge |
38 Special +P
|
---|---|
Grain Weight |
110 Grains
|
Quantity |
500 Round
|
Muzzle Velocity |
1125 Feet Per Second
|
Muzzle Energy |
300 Foot Pounds
|
Bullet Style |
Solid Hollow Point
|
Bullet Brand And Model |
Barnes TAC-XP
|
Lead Free |
Yes
|
Case Type |
Brass
|
Primer |
Boxer
|
Corrosive |
No
|
Reloadable |
Yes
|