BUFFALO BORE38 WADCUTTER

Buffalo Bore loads their ammunition with the highest quality components available to maximize the performance of the ammunition. This ammunition is safe to use in all 38 Special chambered firearms that are in proper working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases. buffalo bore 38 wadcutter

Owner of Buffalo Bore Tim Sundles on Buffalo Bore Heavy 38 Special Ammunition:

Due to customer demand, we’ve developed this defensive 38SPL ammo. Our customers wanted some devastating 38SPL loads that would fill the following criteria.

1. It won’t hurt older/fragile/alloy revolvers. (Non +P)
2. Is effective as a “fight stopper” through the use of proper bullets.
3. Is more powerful than typical/standard, weak 38SPL ammo.
4. Generate much less recoil than our +P 38SPL ammo.
5. Is flash suppressed.

Buffalo Bore is introducing these three different heavy, yet standard pressure loadings for 38 SPL. These offerings are loaded at standard pressure, but they are much more powerful than normal 38SPL ammo. These loads will not harm older more fragile revolvers. So, these loads are safe for use in ANY 38 SPL revolver, provided it is in normal working condition. As stated above, the “POWER” level of these loads is really closer to a typical +P power level, but the pressure is standard. We are able to develop these powerful standard pressure loads with modern non-canister powders. Again, these loads recoil far less than our +P 38 SPL ammo.

All three of these loads are flash suppressed, so firing them in the dark won’t blind you. We use flash suppressed powder in our defensive ammo, in the loadings we can, because over 90% of all civilian shootings in America, occur in low light, when the criminal element is at work. We don’t want you blinded by your own gunfire after the first shot.

Item 20D utilizes a very hard cast 150gr. WAD CUTTER bullet. The bullet is made hard, so it won’t deform or mushroom. It penetrates deeply (roughly 14 to 16 inches ) and its full diameter profile maximizes blood loss as it cuts and crushes (not slips or slides) its way through tissue. These bullets are hard and properly lubed and will NOT lead your barrel. Note my velocities from real world “over the counter” revolver s- NOT TEST BARRELS!

• a. S&W mod. 60, 2 inch barrel – 868 fps (251 ft. lbs.)
• b. S&W mod. 66, 2.5 inch barrel – 890 fps (264 ft. lbs.)
• c. Ruger SP101, 3 inch barrel – 961 fps (308 ft. lbs.)
• d. S&W Mt. Gun, 4 inch barrel – 1005 fps (336 ft. lbs.)

• PRODUCT INFORMATION

  Cartridge	38 Special
  Grain Weight	150 Grains
  Quantity	500 Round
  Muzzle Velocity	850 Feet Per Second
  Muzzle Energy	241 Foot Pounds
  Bullet Style	Wadcutter
  Lead Free	No
  Case Type	Brass
  Primer	Boxer
  Corrosive	No
  Reloadable	Yes